All LCD/LED TV Service Menu Codes & Complete Guide [2024]

Hi, I know you are looking for the TV Service Menu Codes, That’s why you are here. Well, I would say that you are on the best place on internet where you can find the Service Menu Codes for any of your TV brand like China/Universal TVs, Samsung, JVC, Sanyo, Sony, LG, Videocon, Aiwa, Vizio, Mitsubishi.

Welcome to our website, TVServiceMenuCodes.com This could be the only best resource on the internet to find the Service Codes for all TVs that are made till the date. We update this page regularly, so keep visiting it and find the best stuff you are looking for. Do comment below, if you need any relevant information that is still not present here. We will try our best to solve your problem as soon as possible. Thanks!

The TV Service Menu Codes are used to access the secret menu in TVs, where you can find advanced options/customizations of your TV. People call the service menu, Factory Menu, Secret Mode, Factory Mode or Advanced Menu of TVs But these all same and referred to the Service Menu.

LCD/LED TV Service Menu Codes
LCD/LED TV Service Menu Codes

TV Service Menu Codes (Intro)

Ok, So below you can see a table, all you need to do is, Select your TV brand in the table and this will take you to the section where you can find the Service Menu Codes and the complete procedure to access the service menu of your TV.

NOTE: Please note that accessing the service menu should be done with caution, as it contains advanced settings that can affect the TV’s functionality. Make sure to only modify settings if you are familiar with their purpose and potential consequences.

Safety Precautions

Before accessing the service menu of your LCD/LED TV, it is important to proceed with caution and adhere to the following safety precautions:

  1. Read the User Manual: Before attempting to access the service menu, thoroughly read the user manual provided by the manufacturer. Familiarize yourself with the specific instructions and warnings related to accessing and modifying the service menu settings.
  2. Proceed at Your Own Risk: Changing settings in the service menu may have unanticipated implications and may damage your television. Understand that any changes to the service menu are done at your own risk and responsibility.
  3. Take Note of Default Settings: It is essential to take note of the default settings in the service menu before making any changes. This allows you to revert to the original settings if any issues arise or if you are not satisfied with the changes made.
  4. Document Changes: Keep a record of any changes you make to the service menu. Make a note of the original settings as well as the adjustments you’ve made. This documentation can be useful if you run into problems and need to seek help or revert to the prior settings.
  5. Make Incremental Changes: When adjusting settings in the service menu, it is advisable to make small, incremental changes rather than making drastic adjustments all at once. This approach allows you to observe the impact of each change and identify any adverse effects before proceeding further.
  6. Avoid Unknown Settings: Unless you are well-versed in the specific purpose and consequences of a particular setting, it is generally recommended to avoid modifying unfamiliar options in the service menu. Changing unfamiliar settings without proper knowledge can lead to undesirable outcomes.
  7. Seek Professional Help if Needed: If you are uncertain about accessing the service menu or encounter any difficulties, it is advisable to consult a qualified technician or contact the manufacturer’s customer support. They can provide guidance, troubleshooting assistance, or even perform the adjustments for you.

NOTE: Remember that accessing the service menu of your LCD LED TV should be done with caution and only if you are fully aware of the risks involved. When in doubt, it is always safer to seek a specialist who is experienced in dealing with such technological issues.

Chinese TV Service Menu Codes

If you have a TV with a Universal/Chinese Motherboard, Do try these codes:

  • Press: Menu + 1 1 4 7
  • Press: Menu+ 2 5 8 0

Procedure To Access Chinese TV Service Menu with Codes

  1. Turn On Your TV First
  2. Take Your Remote Control
  3. The Codes are in this format: Menu + 1 1 4 7 or Menu+ 2 5 8 0
  4. So In the above case, You need to Press MENU button on remote first, then press 1 1 4 7 simultaneously with in 3 seconds.
  5. After that, The Service Mode should be displayed to you.
  6. If Not, Try other code provided for your TV on this page.

List Of All China TV Service Menu Codes

If you have a TV with a Chinese or a Universal Motherboard, please try the codes below one by one. I hope you will find the right service code for your Chinese/universal TV.

  • Menu + 1 1 4 7
  • Menu + 1 1 8 5
  • Menu + 1 1 8 3
  • Menu + 2 5 8 0
  • Menu + 1 1 8 7
  • Menu + 7 0 5 0
  • Menu + 8 2 0 2
  • Menu + 7 3 4 3
  • Menu + 2 0 0 8
  • Menu + 1 9 9 9
  • Menu + 0 0 0 0
  • Menu + 1 1 6 7
  • Menu + 1 1 9 9
  • Menu + 1 2 3 4
  • Menu + 2 3 8 7
  • Menu + 8 8 9 3
  • Menu + 2 3 8 3
  • Menu + 4 7 2 5
  • Source + 3 1 3 8
  • Source + 2 5 8 0
  • Source + 2 5 8 5
  • Source + 7 3 4 2
  • Source + 2 5 8 3
  • Source + 2 2 8 3
  • Source + 2 2 8 5
  • Source + 3 1 9 5
  • Source + 3 1 3 7
  • Source + 0 0 0 0

Service Codes By Motherboard Model

  • CV110-AL: Input 2580
  • CV182L_B: Input 2580
  • CV309H-X: Source 2580
  • CV338H-A: Menu 1147
  • CV338H-A32: Menu 1147
  • CV338H-A42: Menu 1147
  • CV338H-A50: Source 2580
  • CV338H-D42: Menu 1147
  • CV338H-D50: Menu 1147
  • CV338H-U42: Menu 1147
  • CV338H-U50: Menu 1147
  • CV56BH.Q28: Input/Source 2580
  • CV56BH.Q32: Input/Source 2580
  • CV56BH.Q42: Input/Source 2580
  • CV56BL.Q24: Input/Source 2580
  • CV56BL-L: Input/Source 2580
  • CV56BL-Y24: Input/Source 2580
  • CV59SH-A: Menu 1147
  • CV59SH-A39: Menu 1147
  • CV59SH-B39: Menu 1147
  • CV59SH-C: Menu 1147
  • CV59SH-D: Menu 1147
  • CV59SH-D32: Menu 1147
  • CV59SH-E32: Menu 1147
  • CV59SH-G32: Menu 1147
  • CV59SH-G39: Menu 1147
  • CV59SH-I: Menu 1147
  • CV59SH-I42: Menu 1147
  • CV59SH-J: Menu 1147
  • CV59SH-O: Menu 1147
  • CV59SH-Q32: Menu 1147
  • CV59SH-S: Menu 1147
  • CV59SH-U32: Menu 1147
  • CV59SH-U39: Menu 1147
  • CV59SH-ASM: Menu 1147
  • CV628H-A: Menu 1147
  • CV628H-B42: Menu 1147
  • CV628H-A50: Menu 1147
  • CV628H-T42: Menu 1147
  • CV628H-U42: Input/Source 2580
  • CV628H-U50: Input/Source 2580
  • CV950H-A42: Input/Source 2580
  • HDV56U-AS: Menu 8896
  • ITV.V59.031: Menu 1147
  • ITV.V59.031.13: Menu 1147
  • ITV.V59.801: Menu 1147
  • ITV.V59.PA671: Menu 1147
  • Jainex 53U11.2 new: Input 208
  • JNX53U11.2: Input 208
  • JUG7.820.531-3: Input 3138
  • KK.M368.A8: Source/Input 815, Source/Input 1147
  • LAD.MV56U.A36: Menu 1147
  • LAD.MV56U.A48: Menu 1147
  • LAD.MV56U.A75: Menu 1147
  • LAD.MV56U.B48: Menu 1147
  • LAD.MV56U.C36: Menu 1147
  • LAD.MV59S.G: Menu 7710
  • LAD.MV59S.I: Menu 7710
  • LAD.MV59S.Q: Menu 7710
  • LAD.MV9.P: Menu 1147
  • LAD.MV9.R: Menu 710
  • MSD338STV5.0: Source 2580
  • P75-2841V6.0: Input 2008
  • QT5A3LP V1.1: Menu 1147
  • QT5A3LP V1.5: Menu 1147
  • QT5A3LP V2.0: Menu 1147
  • S368LA1.5: Menu 208 Or Source/Input 815, 344
  • SKR.03: Menu 1147
  • SKR.801: Menu 1147
  • SKR.816: Menu 1147
  • SKR.819: Menu 1147
  • SP208ESA HK-7050A-V2.08-E: Menu 7050
  • SP36811.2: Source/Input 815
  • SP36821.2: Source/Input 815
  • T.H11.675: Input 336
  • T.H11.816: Input 336
  • T.MS.18VG.81B: Menu 1147
  • T.MS18VG.71A: Menu 1147
  • T.MS18VG.72: Menu 1147
  • T.MSD309.69A: Menu 1147
  • T.MSD309.BP85: Menu 8888
  • T.MT8223.3B: Menu 1147
  • T.R67.03: Menu 1147 & Input/Source 208
  • T.R67.675: INPUT/SOURCE 208
  • T.R83.031: Menu 1147
  • T.R83.816: Menu 1147
  • T.R85.031 v.09: Menu 1147
  • T.R85.031: Menu 1147
  • T.R85.671: Menu 1147
  • T.R85.801: Menu 1147
  • T.R85.816: Menu 1147
  • T.R85.819: Menu 1147
  • T.R85.A81: Menu 1147
  • T.V56.03: Menu 1147
  • T.V56.81: Menu 1147
  • T.V56.A8: Menu 1147
  • T.VST.29.61C: Menu 1147
  • T.VST29.03: Menu 1147
  • T.VST29.61C: Menu 1147
  • T.VST59.031: Menu 1147
  • T.VST59.031 .A81 A8: Menu 1147
  • T.VST59.62: Menu 1147
  • T.VST59S.73: Menu 1147
  • T.VST59S.81: Menu 1147
  • T.VST59S.PA501: Menu+Audio+8532
  • T.VST59S.PB712: Menu 1147
  • T.VST59S.PB716: Menu 1147
  • T.VST59S.PB801: Menu 1147
  • T.VST59S.PB802: Menu 1147
  • T.VST59S.PB813: Menu 1147
  • T.VST59S.PB816: Menu 1147
  • T.VST59S.PB818: Menu 1147
  • T.VST59S.PB819: Menu 2008
  • T.VST59S.PB822: Menu 1147
  • T.VST59.P63: Menu 1147
  • T.VST59.P67: Menu 1147
  • T.VST59.P75: Menu 1147
  • T.VST59.P86: Menu 1147, Menu 8893
  • T.VST59.PA671: Menu 1147
  • T.VST59.PB753: Menu 1147
  • T.VST59.PB816: Input/Source 2580
  • T.VST59.PB819: Menu 2008
  • T.VST59.PB831: Menu 1147
  • T.VST59.P83: Menu 1147
  • TP.HV310.PB801: Menu 1147
  • TP.HV320.PB801: Menu 1147
  • TP.HV320.PB818: Menu 1147
  • TP.HV510.PC821: Source 2580
  • TP.HV510.PC822: Source 2580
  • TP.HV530.PC821: Source 2580
  • TP.MS1306.PB772: Menu, Picture, contrast. 9735
  • TP.MS3463S.PB801: Menu 1147
  • TP.MS3463S.PB818: Menu 1147
  • TP.MS358.PB801: Menu 1147
  • TP.MS358.PB818: Menu 1147
  • TP.MS358.PC821: Menu 1147
  • TP.MS608.P82: Menu 1147
  • TP.MS608.P83: Menu 1147
  • TP.MS608.PB831: Menu 1147
  • TP.MS628.PB803: Menu 1147, Menu 2580
  • TP.MS628.PC821: Menu 1147, Menu 2580
  • TP.MS628.PD65: Menu 1147, Menu 2580
  • TP.MT5505.PB801: Menu 1147
  • TP.MT5505.PB811: Menu 1147
  • TP.MT5505.PD811: Menu 1147
  • TP.MT5507.PB801: Menu 1147
  • TP.MT5507.PC821: Menu 1147
  • TP.MT5507.PC822: Menu 1147
  • TP.MS338.P818: Menu 1147
  • TP.MS338.PB801: Menu 1147
  • TP.MS338.PB802: Menu 1147
  • TP.MS338.PB803: Menu 1147
  • TP.MS338.PC821: Menu 1147
  • TP.MS338.PB818: Menu 1147
  • TP.MS338.PB822: Menu 1147
  • TP.MS608.61: Source 2580
  • TP.R69 PD64: Menu 1147
  • TP.RD8501.03: Menu 1147
  • TP.RD8503.PA671: Menu 1147
  • TP.RD8503.PB819: Menu 1147/2008
  • TP.RD8503.PB824: Menu 1147
  • TP.RT2982.PB801: Menu 8893
  • TP.RT2982.PC821: Menu 1147/2580
  • TP.RT2982.PD811: Menu 1147/2580
  • TP.RT2984T.PC821: Menu 1147/2580
  • TP.RT2982.PC821: Menu 1147/2580
  • TP.RT2982.PB801: Menu 8893
  • TP.RT2982.PC821: Menu 1147/2580
  • TP.RT2982.PD811: Menu 1147/2580
  • TP.V56C.PA673: Menu 1147
  • TP.V56.PA671: Menu 1147
  • TP.V56.PB726: Menu 1147
  • TP.V56.PB801: Menu 1147
  • TP.V56.PB816: Input/Source 2580
  • TP.V56.PB826: Input/Source 2580
  • TP.VST56C.PB818: Menu 1147
  • TP.VST59.P63: Menu 1147
  • TP.VST59.P67: Menu 1147
  • TP.VST59.P75: Menu 1147
  • TP.VST59.P86: Menu 1147, Menu 8893
  • TP.VST59.PA671: Menu 1147
  • TP.VST59.PB753: Menu 1147
  • TP.VST59.PB816: Menu 1147
  • TP.VST59.PB819: Menu 2008
  • TP.VST59.PB831: Menu 1147
  • TP.VST59.P83: Menu 1147
  • TP.VST59S.73: Menu 1147
  • TP.VST59S.81: Menu 1147
  • TP.VST59S.PA501: Menu+Audio+8532
  • TP.VST59S.PB712: Menu 1147
  • TP.VST59S.PB716: Menu 1147
  • TP.VST59S.PB801: Menu 1147
  • TP.VST59S.PB802: Menu 1147
  • TP.VST59S.PB813: Menu 1147
  • TP.VST59S.PB816: Menu 1147
  • TP.VST59S.PB818: Menu 1147
  • TP.VST59S.PB819: Menu 2008
  • TP.VST59S.PB822: Menu 1147
  • VS.SP35851: Source/Input 208
  • VS.T53U21.2: Input 208
  • VS.T56U11.2: Input 208
  • VS.TP53U61.2: Input 208
  • VS.TP53U71.2: Input 208
  • VS.TP56L62.2: Menu 1147
  • VS.TP56U61.2: Input 2580
  • VS.TP56U71.2: Input 2580
  • VS.Tp53U61.2: Input 208
  • VS.Tp53U71.2: Input 208
  • VS.Tp56U61.2: Input 2580
  • VS.Tp56U71.2: Input 2580
  • ZP.V53RL.671: Menu 1147
  • ZP.VST6A338.PB818: Source 2580

Samsung TV Service Menu Codes

Method 1

  1. Ensure that your TV is in standby mode.
  2. Press the “Mute” button on your remote control.
  3. Enter the numeric sequence “1, 1, 9” using the remote control buttons, in that order.
  4. If successful, the Samsung TV service menu should open, granting you access to a range of settings and adjustments.

If the above method didn’t work for you, don’t worry! We have several alternative methods you can try to access the Samsung TV service mode.

Method 2

  1. Power off your TV.
  2. Press the “Mute” button on your remote control.
  3. While holding the “Mute” button, press the numbers “1, 8, 2” in sequence.
  4. Finally, press the “Power” button on the remote control to turn the TV back on. This combination should unlock the service mode.

Method 3

  1. Ensure that your TV is in standby mode.
  2. Press the following buttons on your remote control in sequence: “Display,” “P.STD,” “Mute,” and “Power.”
  3. If executed correctly, the TV will power on, and you will find yourself in the service menu.

Method 4

  1. Put your TV into standby mode.
  2. Press the following buttons on your remote control in sequence: “Sleep,” “P.STD,” “Mute,” and “Power.”
  3. If successful, your TV will turn on, granting you access to the service menu.

Method 5

  1. Make sure your TV is in standby mode.
  2. Press the buttons “Display,” “Menu,” “Mute,” and “Power” on your remote control, in that order.
  3. If all goes well, your TV will power on, and the service menu will be at your fingertips.

Method 6

  1. Set your TV to standby mode.
  2. Using your remote control, press the buttons “Info,” “Menu,” “Mute,” and “Power” consecutively.
  3. If completed correctly, your TV will switch on, revealing the service menu.

Video Guide

Codes:

  1. On Standby – Press: Mute + 182 + Power
  2. Turn OFF, Info, Menu, Mute, Power
  3. Sleep, P.STD, Mute, Power
  4. Display, Menu, Mute, Power
  5. Display, P.STD, Mute, Power
  6. On Standby – Press: Menu, Mute, Power
  7. On Standby – Press: P.STD, Help, Sleep, Power
  8. POWER (off) – Press: MUTE 8 2 4 POWER (on .) -> reset pin
  9. MUTE 119 OK -> “HotelMode”
  10. MUTE 120 EXIT -> “LEDDemo”
  11. MUTE 184 EXIT -> “DV”
  12. MUTE 185 EXIT -> ?
  13. MUTE 187 EXIT -> “DSG” (HDMI test)
  14. MUTE 737 OK -> “PDPFactory”
  15. MUTE 750 EXIT -> “FlashPlayerDemo” (go to content library screen)
  16. MUTE 948 EXIT -> “YahooFactoryReset” (resets widgets)
  17. MUTE OK MUTE OK -> “InfoLinkDemo”
  18. MUTE [“RSS” key?] ->
  19. INFO 321 EXIT -> “Calibration”
  20. MUTE 247 EXIT info ci

Sanyo TV Service Menu Codes

Method 1

  1. Start by unplugging the power supply of your Sanyo TV.
  2. While inserting the power cable back into the outlet, press and hold the “MUTE” button on your remote control.
  3. Continue pressing the “MUTE” button until the TV turns on, and the Service Menu appears on the screen.
  4. Navigate through the menus using the channel up (+) and channel down (-) buttons on your remote control.
  5. To modify the settings, use the volume up (+) and volume down (-) buttons.
  6. In some menus, you may encounter sub-addresses. To adjust sub-item data, use the numeric buttons from 0 to 7.
  7. To exit the service menu, you can either press the “MENU” button or turn off the TV.

Method 2

  1. Begin by disconnecting the power supply of your Sanyo TV.
  2. While reconnecting the power cable to the outlet, press and hold the “VOL –” button located on the TV itself.
  3. Keep pressing the “VOL –” button until the TV powers on, and the Service Menu becomes visible on the screen.
  4. Use the channel up (+) and channel down (-) buttons on your remote control to navigate through the available menus.
  5. Adjust the settings by utilizing the volume up (+) and volume down (-) buttons.
  6. Some menus may contain sub-addresses. To modify sub-item data, utilize the numeric buttons from 0 to 7.
  7. To exit the service menu, press the “MENU” button or turn off the TV.

Aiwa TV Service Menu Codes

Please check back after a while, We’re updating!

Mitsubishi TV Service Menu Codes

To access the service mode in your Mitsubishi TV, you need to follow the codes below one by one:

  • Menu + 0 3 5 3
  • Menu + 0 1 5 7
  • Menu + 0 3 5 7
  • Menu + 8 2 5 7
  • Menu + 2 4 5 7
  • Menu + 2 3 5 8
  • Menu + 2 3 5 7
  • Menu + 2 3 5 6
  • Menu + 1 3 7 0
  • Menu + 1 2 5 9
  • Menu + 1 2 5 7

Vizio TV Service Menu Codes

Here are the instructions for accessing the service menu on a Vizio TV using different methods:

Method 1

  1. Start by turning off the television.
  2. Hold down the CH+ and CH- buttons on the TV simultaneously.
  3. While continuing to hold the CH+ and CH- buttons, press and hold the POWER button on the TV.
  4. Keep holding all three buttons for a few seconds.
  5. Now, using the remote, press the MENU button.
  6. You should see the standard menu on the screen, but with an “F” displayed in the bottom right corner, indicating it is the factory menu.
  7. Press and hold the MENU button on the remote for a few seconds.
  8. The Service Menu will appear on the screen.

Method 2

  1. Make sure the television is turned off.
  2. Hold down the CH+ and CH- buttons on the TV simultaneously.
  3. While continuing to hold the CH+ and CH- buttons, press and release the POWER button on the TV.
  4. Release the CH+ and CH- buttons.
  5. Now, using the remote, press the MENU button.
  6. The standard menu should appear on the screen, with an “F” displayed in the bottom right corner.
  7. Press and hold the MENU button on the remote for a few seconds.
  8. The Service Menu will be displayed.

Method 3

  1. Press and hold the “EXIT” button on the remote for three seconds, and then release it.
  2. Using the remote, press the numbers 1, 2, and 3 in sequence.
  3. Press the EXIT button to exit the service menu.

Method 4

  1. On the remote, press the MENU button, followed by the numbers 2, 4, 8, and 9.
  2. The Service Menu will appear on the screen.
  3. Press the EXIT button to exit the service menu.

Method 5

  1. On the remote, press the MENU button, followed by the numbers 1, 2, and 3.
  2. The Service Menu will appear on the screen.
  3. Press the EXIT button to exit the service menu.

Method 6

  1. On the remote, press the MENU button, followed by the numbers 1, 9, 9, 9, and the RETURN button.
  2. The Service Menu will appear on the screen.
  3. Press the EXIT button to exit the service menu.

JVC TV Service Menu Codes

Method 1

  1. Begin by grabbing your JVC TV remote control and locate the “Display” and “Video Status” buttons.
  2. Press and hold down both the “Display” and “Video Status” buttons simultaneously.
  3. While holding these buttons, you can make adjustments using the “Menu Up” and “Menu Dn” buttons on the remote control.
  4. If you need to modify a specific item, navigate through the options using the “>” or “()” buttons on the remote.
  5. Once you’re done making the necessary changes, you can exit the service mode by pressing the “EXIT” button on the remote control.

Method 2

  1. Start by pressing the MENU button on your JVC TV remote to access the User Menu screen.
  2. Ensure that the indication or arrow on the screen is pointing to and highlighting the “Picture Control” option.
  3. On the top section of the remote, you’ll find buttons labeled TV and VCR. Make sure the TV button is selected.
  4. Next, set the sleep timer to “0” minutes on the User Menu screen.
  5. While the sleep timer is displayed as “0” minutes, simultaneously press the VIDEO STATUS and DISPLAY buttons on the remote.
  6. This action will bring up the Service Menu on your JVC TV.
  7. To exit the Service Menu, simply press the BACK button on the remote control.

Read More: JVC TV Service Menu Codes

Videocon TV Service Menu Codes

Method 1

  1. Ensure that your TV is turned on and displaying a picture.
  2. Take the factory remote control that came with the TV and press the “Menu” button.
  3. Use the navigation buttons on the remote control to scroll through the menu options until you reach the audio settings page.
  4. Once you are on the audio settings page, enter the service menu by pressing the sequence of buttons: 8, 5, 2, 3.
  5. As you enter the correct button sequence, the service menu will appear on the screen.

Avera TV

Method1

  1. Ensure that the television is powered on.
  2. Press Menu 1 1 4 7 to display the service menu on the screen.

Method 2

  1. Verify that the television is turned on.
  2. Press Menu 8 8 9 3 to access the service menu on the screen.

Method 3

  1. Confirm that the television is powered on.
  2. Press Menu 0 0 0 0 to bring up the service menu on the screen.

Method 4

  1. Check that the television is turned on.
  2. Press Source 2 5 8 0 to display the service menu.

Read More: Avera TV Service Menu Codes

Admiral TV

Method 1

  1. Tap the “MENU” button.
  2. Navigate to SOUND -> BALANCE.
  3. When Balance is set to “0,” enter the sequence 1969.
  4. A “M” will appear in the upper left corner of the screen.
  5. Press the “MENU” button.
  6. Access the Service / Manufacturing Menus on the OSD.
  7. To exit, press the “power off” button.

Method 2

  1. Press the “MENU” button.
  2. Go to SOUND -> BALANCE.
  3. When the balance is set to “0,” enter the sequence 0532.
  4. A “M” will appear in the upper left corner of the screen.
  5. Press the “MENU” button.
  6. Access the OSD Menus for the Factory / Service.
  7. To exit, press the “power off” button.

Amoi TV

Method 1

  1. Begin by turning off the television.
  2. While turning on the television, press and hold the Source button on the remote control.

Read More: Amoi TV Service Menu Codes

Akai TV

Method 1

  1. Begin by pressing the MENU button.
  2. Next, tap the buttons 1, 9, 7, and 9.
  3. This will bring up the Service Menu.
  4. To exit, simply turn off the power.

Method 2

  1. Power on the device.
  2. On the remote control, press the MENU, 8, 2, 0, and 2 buttons.
  3. The Service Menu will be displayed.
  4. To exit, turn off the power.

BGH TV

Method 1

  1. Press the menu button on your remote control.
  2. Swipe right to access the entire menu.
  3. Scroll down until you reach the sound section.
  4. Select Advanced Audio Settings from the menu on the right.
  5. Scroll down to locate the Balance slider and ensure it is set to 0.
  6. Enter the number 1969 using your remote control.
  7. The menu will disappear, and a green “M” will appear in the upper left corner.
  8. Press the menu button on your remote control again to reveal the service menu.

Read More: BGH TV Service Menu Codes

Blaupunkt TV

Method 1

  1. Turn on the television.
  2. Press the Menu button.
  3. In quick succession, press the buttons 1 1 4 7.
  4. You will now be in the set’s service menu.

Read More: Blaupunkt TV Service Menu Codes

Bush TV

Method 1

  1. Press the “Menu” button on your remote.
  2. Enter the sequence “8, 8, 9, 3” using the Source button.
  3. Press the “OK” button to confirm.
  4. To exit the service mode, use the “Exit” button.

Method 2

  1. Power on the television.
  2. Press the “Source” button on your remote, followed by the numbers “2, 5, 8, 0”.
  3. To exit the service menu, press the “Exit” key.

Read More: Bush TV Service Menu Codes

Beko TV

  1. Ensure that the Beko TV is turned on.
  2. Press the buttons in the following sequence: Menu + 9 + 3 + 0 + 1.
  3. The service menu will now be opened, providing you with access to the settings and options.

Bang & Olufsen TV

Method 1

  1. Press the MENU button on the remote control.
  2. Then click the 0 + 0 + GO buttons.

Read More: Bang & Olufsen TV Service Menu Codes

Changhong Ruba TV


Here are some different ways to access the service menu on a Changhong Ruba TV:

Method 1

  1. Make sure the TV is turned on.
  2. Press the “Source” button followed by the numbers “1,” “1,” “2,” and “5.”
  3. You should now see the TV’s service menu.

Method 2

  1. Ensure that the TV is turned on.
  2. Press the “Source” button followed by the numbers “3,” “1,” “3,” and “0.”
  3. The service menu should appear on the screen.

Method 3

  1. Verify that the TV is turned on.
  2. Press the “Source” button followed by the numbers “3,” “1,” “3,” and “8.”
  3. The service menu should now be accessible.

Method 4

  1. Confirm that the TV is turned on.
  2. Press the “Menu” button followed by the numbers “1,” “1,” “2,” and “5” to open the menu.
  3. The service menu will now be displayed.

Method 5

  1. Ensure that the TV is turned on.
  2. Press the “Menu” button followed by the numbers “1,” “1,” “4,” and “7” to open the menu.
  3. You should now see the service menu on the screen.

Method 6

  1. Make sure the TV is turned on.
  2. Press the “Menu” button followed by the numbers “0,” “8,” “1,” and “6” to open the menu.
  3. The service menu will be accessible after this.

Method 7

  1. Check that the TV is turned on.
  2. Press the “Menu” button followed by the numbers “2,” “5,” “8,” and “0.”
  3. The service menu should now be visible on the screen.

Coby TV


Here are two methods to access the service menu on a Coby TV:

Method 1

  1. Ensure that the TV is turned on.
  2. Press the Menu button on the TV’s remote control.
  3. Navigate to the “audio” menu by using the arrow or navigation buttons.
  4. Enter the sequence of numbers: 8, 8, 9, 3, and then press the Mode button.
  5. The TV’s service menu should now be accessible.

Method 2

  1. Make sure the TV is turned on.
  2. Press the Menu button on the TV’s remote control.
  3. Navigate to the “audio” menu using the arrow or navigation buttons.
  4. Enter the sequence of numbers: 2, 5, 8, 0, and then press the Source button.
  5. You should now be able to access the service menu on the Coby TV.

Cello TV

Cello TVs have different methods to access their service menu codes. Here are three methods explained:

Method 1

  1. Grab your Cello TV remote and locate the Menu button.
  2. Press the Menu button once.
  3. Now, quickly press the numbers 1, 1, 4, and 7 on the remote in that order.

Method 2

  1. Look for the Source button on your Cello TV remote.
  2. Press the Source button once.
  3. Without wasting time, press the numbers 2, 5, 8, and 0 on the remote in that order.

Method 3

  1. Find the Menu button on your Cello TV remote.
  2. Press the Menu button once.
  3. In a rapid sequence, press the numbers 4, 7, 1, 1, 4, and 7 on the remote in that order.

Dynex TV

Method 1

  1. Start by pressing the INPUT button.
  2. Afterward, enter the code 2, 5, 8, 0 following the INPUT button.

Method 2

  1. Begin by pressing the Menu button.
  2. Next, input the sequence 1, 9, 9, 9.
  3. Finally, press ENTER.

Read More: Dynex TV Service Menu Codes

Durabase TV

To access the service menu on a Durabase TV, follow these steps:

  1. Using the remote control, press the Menu button.
  2. Quickly enter the sequence 4, 7, 2, and 5.

Daewoo TV

Method 1

  1. Power on the TV.
  2. Utilize the Source, Right Arrow, and Down Arrow keys.

Method 2

  1. Switch on the television.
  2. With the original remote control, navigate to the main menu.
  3. Select the picture menu option.
  4. Press the keys “9”, “3”, “0”, and “1”.

Read More: Daewoo TV Service Menu Codes

Ecostar TV

Method 1

  1. Press: Menu + 2 0 0 8

Method 2

  1. Press: Menu 8 2 0 2

Read More: Ecostar TV Service Menu Codes

FFalcon TV

Method 1

  1. Switch on the TV and select Menu.
  2. Decide on the Picture Menu.
  3. the Contrast Submenu option
  4. Press 9, 7, 3, 5
  5. After selecting FAC HOTKEY, press the enter or return key.

Useful: FFalcon LCD TVs Service Menu Codes

Element TV

Method 1

  1. Use the remote to press Menu.
  2. Once you press 0000, the service menu will appear.

Method 2

  1. Use the remote to press Menu.
  2. Once you press 1147, the service menu will appear.

Read More: Element TV Service Menu Codes

Finlux TV

Method 1

  1. Press the Menu button on the remote.
  2. Quickly press 4, 7, 2, and 5.

Funai TV

Method 1

  1. Turn off the Power.
  2. Press and hold the “MENU” button on the TV.
  3. Finally, press the “STANDBY-ON” button on the television.
  4. When you switch on the TV, the Service Menu will appear.
  5. To exit, press the STANDBY-ON button on the TV.

Method 2

  1. Turn on the TV by pressing the “POWER” button.
  2. On the remote control, press the STANDBY-ON, 2, 7, 1, and MUTE buttons.
  3. The service menu will appear.
  4. To leave, press the STANDBY-ON button on the remote.

Method 3

  1. Turn off the power.
  2. On the TV, press and hold the SETUP button.
  3. Finally, on the TV, press the STANDBY-ON button.
  4. The television will turn on and display the Service Menu.
  5. Before leaving, switch off the television by pushing the STANDBY-ON button.

Method 4

  1. Simultaneously press the CH – and VOL – buttons.
  2. Next, press the MENU button.
  3. The Service Menu will appear.
  4. To exit, turn off the power.

Method 5

  1. Press the CH+, CH -, and VOL+ buttons simultaneously.
  2. Then, press the MENU button.
  3. The Service Menu will be displayed.
  4. To exit, turn off the power.

Useful: Funai LCD Service Menu Codes

Grundig TV

Method 1

  1. Press the I button.
  2. Then, press ‘OK’, ‘SERVICE,’ and ‘OK.’
  3. Enter the Service Code ‘8500.’
  4. The Service Menu will be displayed.
  5. To exit, turn off the power.

Method 2

  1. While the TV is in standby mode, press and hold the i button on the remote control while simultaneously pressing the POWER button on the TV.
  2. The TV will turn on and show the Service Menu.

Method 3

  1. Press and hold down the i button for a few seconds.
  2. Enter the service code ‘8500.’
  3. The Service Menu will appear.
  4. Press the TXT button to exit.

Method 4

  1. While the TV is in standby mode, press and hold the P/C button on the remote control while simultaneously pressing the POWER button on the TV.
  2. The TV will turn on and display the Service Menu.
  3. To exit, turn off the power.

Method 5

  1. Start by turning off the television.
  2. While pushing the POWER button on the TV, press and hold the MENU button.
  3. Wait until the power light illuminates, then press the POWER button on the remote.
  4. The Service Menu will appear.

Method 6

  1. On the remote control, press the DISPLAY, MUTE, SLEEP, and FUZZY buttons.
  2. The Service Menu will be shown.

Read More: Grundig TV Service Menu Codes

Hyundai TV

Method 1

  1. Using the remote control, press the MENU 4 7 2 5 buttons in sequence.
  2. The Service Menu will be displayed.
  3. Press the EXIT or MENU button to exit the Service Menu.

Method 2

  1. Press the MUTE, MENU, OK, and SLEEP buttons on the remote control simultaneously.
  2. The Service Menu will appear on the screen.
  3. To exit, turn off the power.

Method 3

  1. On the remote control, simultaneously press the CAPS and REVEAL buttons.
  2. The Service Menu will be shown.
  3. To save changes and exit, press the OK button.

Method 4

  1. Using the remote control, press the MENU, SAP, SLEEP, and MAGIC buttons consecutively.
  2. The Service Menu will be accessible.
  3. To exit, turn off the power.

Read More: Hyundai TV Service Menu Codes

Haier TV

Method 1

  1. Power on the television.
  2. Press the “Source” button, followed by the sequence 2, 5, 8, 0.
  3. To exit the service menu, press the Exit key.

Method 2

  1. Press the Menu button.
  2. Enter the code Source 8 8 9 3.
  3. Press OK.
  4. To exit the service mode, press the EXIT button.

Method 3

  1. Turn on the television.
  2. Press the Menu button, followed by the sequence 1, 9, 9, 9.
  3. To exit the service menu, press the Exit key.

Codes

  • Menu + 1 1 4 7
  • Menu + 1 9 9 9
  • Menu + 8 2 0 2
  • Menu + 8 8 9 3
  • Menu + 4 5 7 8
  • Source + 2 5 8 0
  • Menu + Highlight Audio+8893
  • Menu + Source+8893+Ok
  • MENU/EXIT + 1999 + OK

Read More: Haier TV Service Menu Codes

Hisense TV

To access the service menu on a Hisense TV, follow these steps:

  1. Press the Menu button on the remote control.
  2. Swipe right to navigate to the entire menu.
  3. Scroll down to the sound section.
  4. Select Advanced Audio Settings from the menu on the right.
  5. Scroll down to locate the Balance slider and ensure it is set to 0.
  6. Enter the code 1969 using the remote control.
  7. The menu will disappear, and a green “M” will appear in the upper left corner.
  8. Press the Menu button on the remote, and the service menu will appear.

Hitachi TV

Method 1

  1. Power off the television.
  2. Press and hold the INPUT button on the TV, then press the POWER button.
  3. Keep both buttons pressed until the TV turns on and the Service Menu appears.
  4. To navigate, use the UP and DOWN arrows.
  5. To modify data, use the LEFT and RIGHT arrows.
  6. To exit the Service Menu, use the EXIT button.

Method 2

  1. Power on the television.
  2. On the remote control, press the MENU MENU 8 SELECT buttons.
  3. The Service Menu will be displayed.
  4. To navigate, use the UP and DOWN arrows.
  5. To modify data, use the LEFT and RIGHT arrows.
  6. To exit the Service Menu, use the EXIT button.

Method 3

  1. Power off the television.
  2. Hold down the POWER and INPUT buttons on the TV for more than 3 seconds.
  3. The Service Menu will appear.
  4. The letter “P” represents image, and the letter “A” represents audio.
  5. To navigate, use the UP and DOWN arrows.
  6. To modify data, use the LEFT and RIGHT arrows.
  7. To exit the Service Menu, press the EXIT key.

Method 4

  1. Power on the television.
  2. Select the CATV mode.
  3. Press the SOURCE button.
  4. Enter the sequence 3195.
  5. To exit, press the “power off” button.

Read More: Hitachi TV Service Menu Codes

Horizon TV

Method 1

  1. Navigate to the “Main Menu” and select the “Install Menu.”
  2. Then, press the buttons 4, 7, 2, 5.
  3. The Service Menu will be displayed.

Method 2

  1. Access the ‘Main Menu.’
  2. Then, press the buttons 4, 7, 2, 5.
  3. The Service Menu will appear.

Read More: Horizon TV Service Menu Codes

Hannspree TV

Method 1

  1. Check that the television is turned on.
  2. In a fast succession, press INPUT 0 2 3 6 3 MENU.

Read More: Hannspree TV Service Menu Codes

Insignia TV

To access the Factory Set Menu on a TV, follow these steps:

  1. Turn on the TV.
  2. Set the volume to zero.
  3. Using the remote, input the code 9876.
  4. Press the OK button within 5 seconds.
  5. If successful, you will be directed to the Factory Set Menu.

Useful: Insignia LCD Service Menu Codes

Intex TV

  • 1. Check that the television is turned on.
  • 2. Press Menu + 8 + 8 + 9 + 6 to open the menu.
  • 3. You will now be in the set’s service menu.

Codes

  • LED-1602 Menu + 8 8 9 6
  • LED-1602N Menu + 8 8 9 6
  • LED-1600 Input + 2 5 8 0
  • LED-1611-VT13 Source + 6 9 6 4
  • LE19HD08-BO13 Input + 2 5 8 0
  • LED TV-1902 Menu + 8 8 9 6
  • LED 2110 Source + 6 9 6 4
  • LED TV-2202 FHD Menu + 1 1 4 7
  • LED-2200FHD Menu + 1 1 4 7
  • LED TV-2410 Menu + 8 2 0 2
  • LED TV-2400 HD Menu + 1 1 4 7
  • LED TV-2800 Menu + 1 1 4 7
  • LED TV -LE31HD08/3108 Source + 2 5 8 0
  • LED TV-3107 Menu + 1 1 4 7
  • LED TV-3207 Menu + 1 1 4 7
  • LED TV-3199 GOLD Menu + 1 1 4 7
  • LED TV-3210 Menu + 1 1 4 7
  • LED-3110 Menu + 8 2 0 2
  • LED TV-3111 Inside Menu- S/W update
  • LED TV -3900 FHD Menu + 1 1 4 7
  • LED TV-4000FHD Menu + 8 2 0 2
  • LED-40FHD10-VM Input + 2 5 8 0
  • LED TV-4200FHD Menu + 8 2 0 2
  • LED-2011 (19.5″) Menu +1 1 4 7
  • LED-2412 Menu + 8 2 0 2
  • LED- 4010FHD Menu +8 2 0 2
  • LED-2111 (20.7″) Menu + 1 1 4 7
  • LED- 5000FHD Menu + 8 2 0 2
  • LED 23.6″ Menu + 1 1 4 7
  • LED-4001 (39″ HD) Menu + 1 1 4 7
  • LED-2203FHD (21.5″) Source + 6 9 6 4
  • Splash-800 (32″) Menu + 1 1 4 7
  • LED-2810 (28″) Menu + 1 1 4 7
  • 43″ LED TV (LED-4300FHD) Menu + 8 2 0 2
  • 49″ LED TV (LED-5010FHD) Menu + 8 2 0 2
  • LED-3105T Input + 2 5 8 0

Read More: Intex TV Service Menu Codes

Konka TV

Method 1

  1. Using the manufacturer remote control, first push the Menu button, then the RECALL button five times.
  2. The service menu is now active.

Method 2

  1. Using the factory remote, push the MENU button once, then the PRE button five times.
  2. The service menu is now active.

Useful: Konka TV Service Menu Codes

Kogan TV

Method 1

  1. Turn the TV ON
  2. Press Menu on Remote
  3. Then, Press 2 0 0 8

Useful: Kogan TV Service Menu Codes

LG TV

Method 1

  1. Press and hold the OK> button simultaneously on both the remote control and the TV panel for a few seconds.
  2. The Service Menu will appear.

Method 2

  1. Press and hold the MENU button on the remote control and the MENU button on the TV for at least 5-7 seconds.
  2. The Service Menu will be displayed.

Method 3

  1. On the remote control, press and hold the MENU button until a 4-digit password screen appears.
  2. Enter one of the following 4-digit passwords:
    • 0 4 1 3
    • 0 0 0 0
    • 8 7 4 3
    • 8 7 4 1
    • 7 7 7 7
    • 8 8 7 8

Useful: LG TV Service Menu Codes

Useful: LG LCD Service Menu Codes

Liyama TV

To access the service menu on an Liyama TV, follow these steps:

  1. Turn off the display.
  2. While holding down the MENU button, press the POWER button twice.
  3. While continuing to hold down the – button, press the POWER button again.
  4. To enter the Service Mode, press the MENU button.
  5. To exit the Service Mode, press the POWER button.

Loewe TV

Method 1

  1. Press the MENU button on the TV’s front panel.
  2. Select “Service” from the menu.
  3. Press the MENU button on the remote control.
  4. The Service Menu will be displayed.
  5. Turn off the TV to exit.

Method 2

  1. Press the FUNCTION button on the TV’s front panel.
  2. Hold down the CH – button on the remote control until the Service Menu appears. Note:
  • Use the CH+ and CH- buttons to navigate through menus.
  • Use the OK button to make selections.
  • Use the VOL+ and VOL- buttons to modify menu items.
  • Press the OK button to save a specific setting.

Method 3

  1. Press the MENU button on the TV’s front panel five times. The notification “Service” will appear on the screen.
  2. Then, on the remote control, press the MENU button.
  3. The Service Menu will be shown.
  4. Turn off the TV to exit.

Useful: Loewe TV Service Menu Codes

Lloyd TV

To access the service menu on a Lloyd TV, follow these steps:

  1. Ensure that the TV is turned on.
  2. Press the Menu button, followed by the sequence 1, 1, 4, 7.
  3. The TV will enter the service menu.

Logik TV

To access the service menu on a Logik TV, follow these steps:

  1. Start by turning off the television.
  2. While turning on the television, press and hold the Source button on the remote control.

Luxor TV

To access the service menu on a Luxor TV, follow these steps:

  1. On the remote control, press the Menu button.
  2. Quickly and in rapid succession, press the sequence 472 25.

Useful: Luxor Smart TV Service Menu Codes

Micromax TV

To access the service menu on a Micromax TV, follow these steps:

  1. Using the remote control, navigate to the OSD (On-Screen Display) menu.
  2. Enter the “Picture” submenu within the OSD.
  3. Select the “contrast” item.
  4. Press the sequence 9 7 0 5.
  5. The Service Menu will appear on the left side of the screen.

Codes:

Here are the service menu codes for different Micromax TV series:

  • B Series: Source 2580
  • C Series: Source 3138
  • K Series: Menu, Sound, Balance, 1969
  • 32T Series: Menu 1147
  • 40T Series: Menu, Contrast, 9735
  • 50K2330UHD: Menu 2008
  • 24L31FHD, 24L32FHD: Menu 8202
  • 42C0050UHD: Setting 0816

Please note that these codes are specific to the respective Micromax TV series mentioned.

Mitashi TV

Here are different methods to access the service menu on a Micromax TV

Method 1

  1. Ensure that the television is turned on.
  2. Press Source + 2 + 5 + 8 + 0 on the remote.
  3. You will now enter the set’s service menu.

Method 2

  1. Make sure the TV is turned on.
  2. Press Menu + 2 + 5 + 8 + 0 on the remote.
  3. You will now enter the set’s service menu.

Method 3

  1. Ensure that the television is turned on.
  2. Press Menu + 8 + 2 + 2 + 2 + 2 on the remote.
  3. You will now enter the set’s service menu.

Method 4

  1. Ensure that the TV is turned on.
  2. Press Menu + 1 + 1 + 4 + 7 on the remote.
  3. You will now enter the service menu of the set.

Method 5

  1. Ensure that the television is turned on.
  2. Press Menu + 0 + 0 + 0 + 0 + 0 on the remote.
  3. You will now enter the set’s service menu.

Codes:

  1. MiC019V01 – Enter: SOURCE + 2580
  2. MiC022V01 – Enter: SOURCE + 2580
  3. MiC032V01 – Enter: MENU + 2580
  4. MiC022V02 – Enter: MENU + 7168
  5. MiC022V03 – Enter: MENU + 7168
  6. MiC032V02 – Enter: MENU + 8222
  7. MiE022V01-adapter – Enter: MENU + 7168
  8. MiE022v01-SMPS – Enter: MENU + 1147
  9. MiE032V01 – Enter: MENU + 8222
  10. MiE024V01 – Enter: MENU + 0000
  11. MiC019V04 – Enter: MENU + 2580
  12. MiC022V04 – Enter: MENU + 2580
  13. MiC024V04 – Enter: MENU + 2580
  14. MiE022V04 – Enter: MENU + 2580
  15. MiE024V04 – Enter: MENU + 2580
  16. MiC032V04 – Enter: MENU + 2580
  17. MiC019V07 – Enter: MENU + 1147
  18. MiC022V07 – Enter: MENU + 1147
  19. MiC024V07 – Enter: MENU + 1147
  20. MiC032V07 – Enter: MENU + 8222
  21. MiE032v08 – Enter: MENU + 1147
  22. MiC022v06 – Enter: INPUT + 6964 / MENU + 0000
  23. MiC040v01 FHD – Enter: MENU + 2580
  24. MiC040v01-EL – Enter: MENU + 1147
  25. MiE019v05 – Enter: MENU + 0000
  26. MiE022v05 FHD – Enter: MENU + 0000
  27. MiE022v08 FHD – Enter: MENU + 0000
  28. MiE022v08 NMB – Enter: MENU + 1147
  29. MiE023v05 – Enter: MENU + 0000
  30. MiE023v05 AN01 – Enter: MENU + 0000
  31. MiC022v05 – Enter: MENU + 0000
  32. MiC022v08 – Enter: MENU + 0000
  33. MiC032v05 – Enter: MENU + 0000
  34. MiE032v02 FHD – Enter: MENU + 0000
  35. MiE040v01 FHD – Enter: MENU + 0000
  36. MiDE032v06 – Enter: MENU + 1147
  37. MiDE039v06 FHD – Enter: MENU + 1147
  38. MiDE032v05-Ist – Enter: MENU + 1147
  39. MiDE032v05-IInd – Enter: MENU + 1147
  40. MiDE032v05 NMB – Enter: MENU + 1147
  41. MiDE032v05 TW – Enter: MENU + 1147
  42. MiDE032v05 WCI – Enter: MENU + 1147
  43. MiDE032v05 CV59 – Enter: MENU + 1147
  44. MiDE039v05 FHD – Enter: MENU + 1147
  45. MiDE039v05 NMB – Enter: MENU + 1147
  46. MiDE039v05 TW – Enter: MENU + 1147
  47. MiE019v08 – Enter: MENU + 1147
  48. MiE024v08 FHD – Enter: MENU + 1147
  49. MiE024v09 FHD – Enter: MENU + 1147
  50. MiE024v10 FHD – Enter: MENU + 1147
  51. MiDE050v05 FHD – Enter: MENU + 1147
  52. MiE030v08 – Enter: MENU + 1147
  53. MiE022v09 FHD – Enter: MENU + 0000
  54. MiE030v09 – Enter: MENU + 0000
  55. MiC015v01 – Enter: INPUT + 1147
  56. MiC017v01 – Enter: INPUT + 1147
  57. MiE015v01 – Enter: INPUT + 1147
  58. MiE017v01 – Enter: INPUT + 1147
  59. MiDE032v09 – Enter: MENU + 0000
  60. MiDE065v09 FHD – Enter: MENU + 0000

Marantz TV

To access the service menu on a Marantz TV, follow these steps:

  1. On the remote control, simultaneously press the MENU, SAP, SLEEP, and MAGIC buttons.

Matsui TV

Method 1

  1. Put the TV in standby mode.
  2. Press and hold the I button on the remote while simultaneously pressing the POWER button on the TV.
  3. The TV will turn on and display the Service Menu.
  4. To navigate menus/options, use the UP/DOWN arrows.
  5. To change settings, use the LEFT and RIGHT buttons.
  6. Turn off the power to exit the Service Menu.

Method 2

  1. Turn off the television.
  2. While holding down the MENU button on the TV, press and hold the POWER button.
  3. Wait until the power light illuminates, then press the POWER button on the remote.
  4. The Service Menu will appear.
  5. To select options, use the P+ and P- buttons.
  6. To change settings, press the VOL+ and VOL- buttons.
  7. Turn off the power to exit the Service Menu.

Method 3

  1. Reduce the volume to the lowest level (0).
  2. Press and hold the VOL- button on the TV and the 9 button on the remote control for a few seconds.
  3. The Service Menu will appear.
  4. To select items, use the ch+ and ch- buttons.
  5. To change values, press the VOL+ and VOL- buttons.
  6. Press the 8 button to exit the Service Menu.

Useful: Matsui TV Service Menu Codes

Noblex TV

Method 1

  1. Press the “MENU” button on the remote control.
  2. Navigate to the “SOUND” menu and select “BALANCE.”
  3. When the Balance value is “0,” enter the sequence 1969.
  4. A “M” will appear on the upper left of the screen.
  5. Press the “MENU” button.
  6. The Service/Manufacturing Menus will be displayed on the OSD (On-Screen Display).
  7. To exit, press the “power off” button.

Method 2

  1. Press the “MENU” button on the remote control.
  2. Navigate to the “SOUND” menu and select “BALANCE.”
  3. When the Balance value is “0,” enter the sequence 0532.
  4. A “M” will appear on the upper left of the screen.
  5. Press the “MENU” button.
  6. The OSD Menus for the Factory/Service will be shown.
  7. To exit, press the “power off” button.

Useful: Noblex TV Service Menu Codes

Nokia TV

Method 1

  1. Turn off the television (Standby).
  2. On the remote, press the 372 POWER buttons.
  3. The Service Menu will appear.
  4. Turn off the power to exit the Service Menu.

Method 2

  1. Turn on the television.
  2. On the remote, press the MUTE and OK TV buttons.
  3. The Service Menu will appear.

Method 3

  1. On the remote, press the -/— MENU TV buttons.
  2. The Service Menu will appear.
  3. Turn off the power to exit the Service Menu.

Method 4

  1. On the remote, press the i, M, PROG buttons.
  2. The Service Menu will appear.
  3. To exit, press the TV button or turn off the power.

Method 5

  1. On the remote, press the MENU and TV I buttons.
  2. The Service Menu will appear.
  3. Press the TV button to exit the Service Menu

Useful: Nokia TV Service Menu Codes

Onida TV

Method 1

  1. Ensure that the TV is turned on and displaying a picture.
  2. On the factory remote control, press the source button.
  3. Navigate to the audio configuration page.
  4. The factory menu will be displayed if you press the numbers 2, 5, 8, or 0.

Codes:

  • Source + 2 5 8 0
  • Menu, VOL +, 8 5 3 2
  • Menu, PIC, Contrast, 9 7 3 5
  • Menu, PIC, Contrast, 1 9 5 0

Useful: Onida TV Service Menu Codes

OKI TV

To access the OKI TV service menu using the code sequence you provided, please follow these steps:

  1. Make sure that the OKI TV is turned on and displaying a regular broadcast or input.
  2. On the OKI TV remote control, press the MENU button.
  3. Enter the following code sequence using the numeric keypad on the remote: 4 7 2 5 4 7 2 5.
  4. The service menu should appear on the screen, providing access to various settings and options for the TV.
  5. Use the navigation buttons on the remote control to navigate and make changes within the service menu.
  6. When you are finished making changes or exploring the service menu, you can exit by pressing the MENU button again or turning off the TV.

Proscan TV

Method 1

  1. On the remote control, press INPUT.
  2. Then press the 2580 button.

Panasonic TV

Get: Panasonic LCD Service Menu Codes

Here are different methods to access the service menu on a Panasonic TV:

Method 1

  1. Hold down the VOL – button on the TV.
  2. On the remote, press the 0 button three times.
  3. To exit, either press the EXIT button or switch off the power.

Method 2

  1. On the TV, press and hold the VOL – button.
  2. On the remote, press the RECALL or INFO button three times.
  3. The Service Menu will appear.
  4. To exit service mode and save changes, power off the TV.

Polaroid TV

To access the service menu on a Polaroid TV, follow these steps:

  1. Turn on the television.
  2. Hold down the VOL+ and CH+ buttons simultaneously.
  3. The Service Menu will appear.

Philips TV

Get: Philips LCD Service Menu Codes

Here are different methods to access the service menu on a Philips TV:

Method 1: On the remote, press the 0, 6, 2, 5, 9, 6, and MENU/HOME buttons.

Method 2: On the remote, press the 0, 6, 1, 5, 9, 6, and MENU/HOME buttons.

Method 3: On the remote, press the 0, 6, 2, 5, 9, 6, and OSD/STATUS/INFO buttons.

Method 4: On the remote, press the 1, 2, 3, 6, 5, 4 buttons.

Method 5: On the remote, press the 0, 6, 2, 5, 9, 7, and MENU/HOME buttons.

Method 6: On the remote, press the 0, 6, 2, 5, 9, 6, and INFO buttons.

Method 7: On the remote, press the 0, 6, 1, 5, 9, 7, and MENU/HOME buttons.

Roadstar TV

  1. Press the MENU button on the remote.
  2. Enter the sequence 9, 3, 0, and 1.
  3. The service menu will be displayed.
  4. Press the TV/TX button to exit the service menu.

RCA TV

Method 1

  1. On the remote control, press the INPUT button.
  2. Quickly tap the 2, 5, 8, and 0 buttons in sequence.
  3. The Service Menu will be displayed.

Method 2

  1. On the remote control, press the MENU button.
  2. Quickly tap the 1, 1, 4, and 7 buttons in sequence.
  3. The Service Menu will appear on the screen.

Schneider TV

Method 1

  1. Press the “MENU” button on the remote control to enter the “Install” Menu.
  2. Push the buttons marked 4, 7, 2, and 5 in sequence.
  3. The Service Menu will be displayed on the screen.

Method 2Technika

  1. On the TV, press the VOL- button to decrease the volume.
  2. On the remote control, simultaneously press the “PROG” button and the “-/-” button followed by the “TV” button.
  3. The Service Menu will appear on the screen.

Sony TV

Method 1: Press the following buttons on the remote control once the TV is in standby mode: Displaying “5” {POWER}

Method 2: Press the following buttons on the remote control once the TV is in standby mode: Displaying “5” A “VOL+” {POWER}

Method 3: Press the following buttons on the remote control once the TV is in standby mode: Display “5” PICTURE + POWER

Method 4: Press the following buttons on the remote control once the TV is in standby mode: Display “5” {VOL+} {PICTURE} {POWER}

Seiki TV

  1. On your remote control, press Menu.
  2. After that, press 0000 to access the service menu.

Sanyo TV

Here are different methods to access the service menu on a Sanyo TV:

Method 1

  1. Unplug the power supply from the TV.
  2. While inserting the power cable back into the outlet, press and hold the MUTE button on the remote control.
  3. Continue to hold the MUTE button until the TV turns on and the Service Menu appears.
  4. To navigate menus, use the ch+ and ch- buttons.
  5. To adjust settings, use the VOL+ and VOL- buttons.
  6. Some menus may have sub-addresses. To modify sub-item data, use the numeric buttons 0 to 7.
  7. To exit the Service Menu, use the MENU button on the remote or turn off the TV.

Method 2

  1. Unplug the power supply from the TV.
  2. While plugging the power cable back into the outlet, press and hold the VOL- button on the TV.
  3. Continue to hold the VOL- button until the TV turns on and the Service Menu appears.
  4. To navigate menus, use the ch+ and ch- buttons.
  5. To adjust settings, use the VOL+ and VOL- buttons.
  6. Some menus may have sub-addresses. To modify sub-item data, use the numeric buttons 0 to 7.
  7. To exit the Service Menu, use the MENU button on the TV or turn off the TV.

Please note that accessing the service menu and making changes should be done with caution as it can affect the TV’s functionality and settings. It is recommended to refer to the TV’s user manual or contact Sanyo support for specific instructions related to your TV model.

Sceptre TV

Method 1: Press the Menu button, followed by the sequence 7, 3, 4, 3.

Method 2: Press the Source button, followed by the sequence 7, 3, 4, 3 in quick succession.

Sylvania TV

To access the service menu on a Sylvania TV, you can try the following methods:

Method 1

  1. Check that the TV is turned on.
  2. Press Menu, followed by the sequence 8 8 9 3. The service menu should appear on the screen.

Method 2

  1. Check that the TV is turned on.
  2. Press Menu, followed by the sequence 1 1 4 7. The service menu should show on the screen.

Method 3

  1. Ensure that the television is on.
  2. Press 0 0 0 0 on the remote to bring up the service menu.

Method 4

  1. Make sure the television is on.
  2. Press Source, followed by the sequence 2 5 8 0. The service menu should be displayed.

Sansei TV

Method 1

  1. Press the “MENU” button.
  2. Go to the SOUND menu and select BALANCE.
  3. When the balance is set to “0,” enter the sequence 0532.
  4. A “M” will appear on the upper left of the screen.
  5. Press the “MENU” button.
  6. You should now see the Factory/Service OSD Menus.
  7. To exit, press the “power off” button.

Method 2

  1. Press the “MENU” button.
  2. Go to the SOUND menu and select BALANCE.
  3. When the balance is set to “0,” enter the sequence 1969.
  4. A “M” will appear on the upper left of the screen.
  5. Press the “MENU” button.
  6. You should now see the Factory/Service OSD Menus.
  7. To exit, press the “power off” button.

Sansui TV

Method 1

  1. Check that the TV is turned on and displaying a picture.
  2. Press the MENU button on the OEM (original equipment manufacturer) remote control.
  3. Navigate to the audio settings page.
  4. Press the sequence 8, 5, 2, 3.
  5. The service menu will be displayed.

Technika TV

To access the Technika TV service menu using the code sequence you provided, please follow these steps:

  1. Ensure that the Technika TV is turned on and displaying a regular broadcast or input.
  2. On the TV remote control, press the MENU button.
  3. Enter the following code sequence using the numeric keypad on the remote: 4 7 1 1 4 7.
  4. The Service Menu will appear on the screen, providing access to various settings and options for the TV.
  5. Use the navigation buttons on the remote control to navigate and make changes within the service menu.
  6. When you are finished making changes or exploring the service menu, you can exit by pressing the MENU button again or turning off the TV.

Telefunken TV

Method 1

  1. Press the “MENU” button on the remote control.
  2. Select “SOUND” and then choose “BALANCE” from the menu.
  3. When the Balance value is “0,” enter the sequence 1969 in the proper order.
  4. A “M” will appear in the upper left corner of the screen.
  5. Press the “MENU” button.
  6. The Factory/Service OSD Menus will be displayed.
  7. To exit, press the “power off” button.

Method 2

  1. On the remote control, press the MENU button.
  2. Press the following sequence: 4 7 2 5.
  3. The service menu will appear.

Method 3

  1. Press the “MENU” button on the remote control.
  2. Select “SOUND” and then choose “BALANCE” from the menu.
  3. Enter the sequence 0532 when the Balance value is “0.”
  4. A “M” will appear in the upper left corner of the screen.
  5. Click the “MENU” button.
  6. The Factory/Service OSD Menus will be shown.
  7. To exit, press the “power off” button.

Thomson TV

Method 1

  1. While the Thomson TV is turned on, press the POWER button on the remote control to put it into standby mode.
  2. Turn off the TV by pressing the POWER button on the keypad.
  3. Using the TV’s buttons, turn on the TV while holding down the PRG – and VOL – buttons simultaneously.
  4. The Service Menu will appear on the screen.

Method 2

  1. Put the Thomson TV into standby mode.
  2. Hold down the TV’s “VOL -” and “PRG -” buttons simultaneously while pressing them.
  3. Continue holding both buttons until the TV turns on.
  4. To navigate the Service Menu, use the PR+ or PR- buttons to choose items.
  5. Adjust values using the “VOL+” and “VOL-” buttons.
  6. To exit, turn off the TV.

Codes:

  • Menu 1147
  • Menu 2008
  • Menu 9735
  • Source 2580
  • Menu, PIC, Contrast, 9705
  • Menu, PIC, Contrast, 9735
  • Menu, PIC, Contrast, 1950

UMC TV

Method 1

  1. Press the “MENU” button on the remote control.
  2. Enter the code sequence: 1 1 4 7.
  3. The Service Menu will appear on the screen.

Method 2

  1. Press the “MENU” button on the remote control.
  2. Enter the code sequence: 4 7 1 4 7.
  3. The Service Menu will be displayed.

Method 3

  1. Press the “Source” button on the remote control.
  2. Enter the code sequence: 2 5 8 0.
  3. The Service Menu will show on the screen.

Vestel TV

To access the Vestel TV service menu using the code sequence you provided, please follow these steps:

  1. On the remote control, press the MENU button.
  2. Quickly press the 4, 7, 2, and 5 buttons in succession.
  3. The Service Menu will be displayed on the screen, providing access to various settings and options for the TV.

Viewsonic TV

Method 1

  1. Turn on the television.
  2. Set the TV’s loudness to 0.
  3. Mute the sound.
  4. Press the following buttons in sequence: 9 8 7 6.
  5. The Service Menu will appear on the screen.

Method 2

  1. Turn on the television.
  2. On the remote control, press the MENU button, followed by the sequence: 9 9 1.
  3. The Service Menu will be displayed.
  4. To exit the Service Menu, switch off the television.

Method 3

  1. Turn on the television.
  2. On the remote control, press the -/– button, followed by the sequence: 9 9 1.
  3. The Service Menu will appear.
  4. To navigate through different pages within the Service Menu, press the MENU button, and then press the -/– 9 9 1 buttons again.
  5. To exit the Service Menu, use the EXIT button on the remote control.

Veon TV

To access the service menu on a Veon TV, you can try the following methods:

Method 1

  1. Press the MENU button on the remote control.
  2. Then, enter the sequence 1147.
  3. The service menu should appear.

Method 2

  1. Press the INPUT button on the remote control.
  2. Then, enter the sequence 2580.
  3. The service menu should be accessible.

Viore TV

To access the service menu on a Viore TV, you can try the following methods:

Method 1

  1. Press and hold the MENU button on the remote control and the MENU button on the TV simultaneously for approximately 10 seconds.
  2. A menu will appear, with an option for the Service Menu (“Factory Settings”).
  3. Press the MENU button to exit the service menu.

Method 2

  1. Press and hold the MENU button on the remote control for approximately 10 seconds.
  2. A menu will appear, with an option for the Service Menu (“Factory Settings”).
  3. Press the MENU button to exit the service menu.

Westinghouse TV

To access the service menu on a Westinghouse TV, follow these steps:

  1. Make sure the TV is turned off.
  2. Press and hold the VOL- and VOL+ buttons on the right side of the television.
  3. While still holding these buttons, press the POWER button.
  4. If done correctly, the Westinghouse logo on the front of the television will start blinking.
  5. Release the VOL- and VOL+ buttons.
  6. Press the RETURN key on the remote control.
  7. You are now in Service Mode.
  8. To exit Service Mode, bring up the Standard OSD (On-Screen Display) Menu by pressing the MENU button on the remote control.
  9. Navigate to the GENERAL SETTINGS menu and select FACTORY RESET.
  10. This will clear your OSD settings but preserve any modifications made in the Service Menu.

Please note that accessing the service menu and making changes should be done with caution as it can affect the TV’s functionality and settings. It is recommended to refer to the TV’s user manual or contact Westinghouse support for specific instructions related to your TV model.

Wharfedale TV

To access the service menu on a Wharfedale TV, follow these steps:

  1. Press the Menu button on the remote control.
  2. In quick succession, press the sequence 4, 7, 2, 5.

FAQs

What is tv service menu code

The service menu code is a unique combination of numbers and symbols that grants access to hidden menus or diagnostic settings on electronic devices. It is typically used by technicians or advanced users to troubleshoot, calibrate, or fine-tune the device’s performance. Caution should be exercised when using the service menu code as incorrect changes can void warranties or render the device unusable.

How do I find the hidden menu on my Samsung TV?

To access the hidden menu on a Samsung TV, you can follow these steps:

Make sure your Samsung TV is turned on and displaying a regular TV channel or input.
Using your Samsung TV remote, press the following buttons in sequence: Mute, 1, 8, 2, Power. This should bring up the service menu on your TV screen.
In the service menu, navigate through the options using the arrow keys on your remote. Be cautious while making any changes, as modifying settings incorrectly can affect your TV’s performance.

How do I open the service menu on my smart TV?

Please go to the TV Service Menu Codes section above, and find the service codes and instructions for your TV brand, then follow the instructions, this way, you can easily open the service menu on your Smart TV.

What is the factory reset code for all China TV?

The factory reset code for China TVs may vary depending on the specific brand and model. Unlike universal service menu codes, there isn’t a single code that works for all China TVs.

How do I get to the service menu on my TV?

Access methods vary by TV model. Commonly, press a combination of remote buttons or use a specific code. Consult your TV’s manual or search online for your model’s instructions.

How do I open the service menu on my Android TV?

Android TV service menus typically require a combination of remote key presses or a code. Check your TV’s manual or online resources specific to your Android TV model.

What is the service menu code for LG TV?

The service menu code can vary by LG TV model. It’s often a sequence of numbers, like 0413 or 0000. Check your TV’s documentation or look up your specific model for accurate information.

What is the factory reset code for China TV?

Factory reset codes for Chinese TVs can differ based on the manufacturer and model. Search for your TV’s brand and model to find the correct factory reset code or method.

Additional Resources

Blog

2 thoughts on “All LCD/LED TV Service Menu Codes & Complete Guide [2024]”

Leave a Comment